
ARRONE has launched a new electromagnetic door closer designed to improve accessibility, simplify maintenance and support fire safety in busy buildings.
The AR9798, from the HOPPE Group brand, features a green LED voltage indicator on its switch box to help installers and facilities teams identify potential electrical issues and reduce unnecessary maintenance callouts.
The indicator illuminates when the unit receives the optimum voltage of 20–24V. If the voltage falls below 20V, the light switches off, helping maintenance teams determine whether a fault is electrical or mechanical.
The closer offers both hold-open and free-swing functions. In hold-open mode, it holds the door at a set angle between 80 and 160 degrees, facilitating movement through high-traffic areas such as schools, hospitals, offices and public buildings.
Free-swing mode allows the door to move with little or no resistance, making it suitable for environments where ease of access is particularly important, including healthcare settings and care homes. In both modes, the door is designed to close when the fire alarm is activated.
Switching between the two functions involves removing just two fixings from the closer arm. ARRONE says this is significantly quicker than replacing the entire arm set, a process that can typically take 10–15 minutes, while also reducing the risk of incorrect conversion.
The AR9798 also incorporates a manual release function alongside the electronic release found on many electromagnetic door control solutions. This allows the door to be closed by pushing or pulling it, releasing the magnet without forcing or damaging the mechanism.

Rob Adams, technical manager at ARRONE, said: “Busy buildings need doors that are easy to move through in everyday use but that can still close reliably when fire safety depends on it.
“We’ve designed the AR9798 to incorporate all the best features that are out there in the current market to make it the go-to choice for specifiers, installers and facilities teams while still having that reassurance that it meets industry standards and regulations. The new concept of the voltage indicator light complements these features and helps to make installation and ongoing management more straightforward.”
The closer can be adjusted across power sizes three to six using spring tension, without repositioning the unit on the door. This provides flexibility for specifiers, installers and distributors across a range of applications.
Tested to BS EN 1154 and BS EN 1155, the AR9798 is suitable for 30- and 60-minute timber fire door applications, as well as standard non-fire doors.
It is available in satin stainless steel, silver enamel and black finishes. Installation and conversion how-to videos are available on the HOPPE website.







